Forget Trial And Error; Take Our Tube Bending Course
by Alecia Robinson, on Tue, Oct 10, 2017 @ 15:10 PM
Acquire the skills that will save time, save money and increase system efficiency
Edmonton Valve has been offering a variety of courses over the years, from teaching about fitting installation to improving sampling system performance, we've got you covered. Download our free training catalogue today and find a training class to suit your teams development.
What do valves, fittings, gauges and most other Swagelok components have in common? They need tubing in order to be of any use in a fluid system. Without tubing, all you'd have is a pile of parts.
It's vital, then, to understand how to handle tubing, plan a route for it, cut the correct length of tubing and bend it accurately.
There's not need to learn by trial and error. There's no need to wonder if your co-workers are passing along any bad habits if you rely on them to show you want to do. Rely instead on Edmonton Valve & Fitting. Our four-hour Tube Bending Essentials class on tube bending will show you what you need to know. With guidance from a certified expert, you'll learn how to consistently make optimal tube bends, and do the work efficiently.
What we cover
We start at the beginning: How to handle tubing without damaging it. We'll show you how to properly cut and debur the tubing as well as how to bend it. You'll learn how to calculate the length of tubing you need to get from Point A to Point B. That's especially important when you are using expansion loops and offsets, which we'll also cover.
Good craftsmanship not only saves money by reducing the amount of expensive scrap, it also improves fluid system performance.
The course has hand-on exercises as well as classroom instruction, so you'll be able to practice what you just learned.
Who should attend
Anyone who has to install tubing can benefit from this course: fabricators, contractors and technicians. But it's also valuable knowledge for people who design fluid systems: engineers and draftsmen. Anyone responsible for inspecting or maintaining a fluid system also needs to know if the job was done right: quality control personnel and safety engineers.
Tube Bending Essentials is only one of many classes that we offer. You can contact us through the linked page to sign up for the next class in our new training center, or we can bring the class to your location. If you prefer to talk with a live person, we're at 780-437-0640.