Edmonton Valve & Fitting Blog

Weekly posts for northern and central Alberta engineers, plant operators, and buyers.

Swagelok at the Global Petroleum Show in Calgary (June 12th-14th)

by Katie Reid, on Tue, May 15, 2018 @ 16:05 PM

Stop by our booth #1076 to talk about hose, Grab Sample Modules and watch burst demonstrations


GPS_2016

We are looking forward to heading south to Calgary for the 2018 Global Petroleum Show from June 12th - 14th. Not only are we teaming up with our friends at Calgary Valve & Fitting but with many Swagelok associates from across North America. Make sure you register to come to the show before May 31st for Early bird pricing - see you there!


Once again, Edmonton Valve & Fitting will join forces with other Swagelok affiliates for the big Global Petroleum Show in Calgary from June 12 through 14. We'll be in our usual spot: booth 1076, right inside the doors of Hall A. We'll have 16 people manning the booth in shifts, so you will find a knowledgeable fluid system expert any time from 10 a.m. to 5 p.m. on the first two days, and until 4 p.m. on the third day.

If you haven't been to the GPS in the past, you've been missing the leading exhibition and conference for oil and gas professionals. More than 50,000 trade professionals attend GPS, while more than 100 industry leading experts share their knowledge and understanding across the event’s expansive line-up of conference sessions.

The Swagelok advantage

At our booth we'll have Swagelok hose products on display, along with grab sample panels.

We're also excited to talk to you about MEP services, where we concentrate on three areas in a plant. The first is rotating equipment such as pumps and compressors. We have the specialized fittings that make working on those systems easier, such as Thermowell Tees to reduce the number of welds and up-sizing of pipe.

The second area is energy management and utilities. The third area is conversion from traditional piping to small bore tubing (2-inches and smaller).

Throughout the show we try to have some senior representatives in the booth, so you can have a serious conversation and expect to come away with some solid information. If we can't answer your question on the spot, we'll get your contact information and get back to you as soon as we can.

So excited we could 'burst'

We will also have our burst chamber on-hand that we use in our Swagelok Total Support training classes. Our Swagelok booth staff will be running demos and you can test your skills with pulling up a tube fitting and see what pressure the tubing bursts. We suggest you compete with your peers and see who has the higher burst pressure!

So stop by, say hello, and gather some free information and expertise.We look forward to seeing you in June.


For more on this topic, see:


Topics:Value Added ServicesPeopleEvents

More... (blog home page)

More...

Join us!

Each week our local team posts original articles featuring tips on fluid system maintenance and design, profiles of team members, and free resources you can download here at our website. Join us!